Independent tests prove InstaZorb^TM to be safe to use and passes all EPA requirements.

* Paint Filter Test EPA 9095 (Associated Labs 12/08/93 & Positive Lab Service 07/19/95)
The code of Federal Regulations requires an absorbent that is to be placed in a hazardous waste site to pass the EPA 9095 Test - Paint Filter Test. InstaZorb ^TM is certified to be in compliance with EPA requirements.

* Liquid Release Test EPA 9096 (Ameri-Chem Labs 07/17/95)
This test requires putting a compressive force of 50 lb. per square inch on our product proving that InstaZorb ^TM will not leach under pressure.

* Electrostatic Decay and Electrical Resistivity Test/Static Electricity (CIEMS- California Institute of Electronics and Materials Science)
InstaZorb ^TM has passed all tests imposed on it by the Department of Defense in order to receive National Stock Numbers for all branches of the military. When an aircraft experiences a J4 jet fuel spill it is imperative that the absorbent used does not create any static electricity. InstaZorb ^TM has surpassed the requirements of Military Spec MILB- 81705C, which is important when absorbing any volatile fluid spills.

* Crystalline Silica Test Niosh Method 7500 (EMS Laboratories 08/01/95)
Our product has been tested by X-ray diffraction and a microscopic analysis and has no detectable Crystalline Silica.

* Absorption Efficiency Test (EMS Laboratories 08/25/95)
In a laboratory setting the absorption efficiency test proved that our product will absorb 300%- 800% depending on the density of the material.